Browsing by Author "Jiang, Yan"
Now showing 1 - 5 of 5
- Results Per Page
- Sort Options
Item Bio-based flame retardants to polymers: A review.(Advanced Industrial and Engineering Polymer Research, 2022) Wang, Meiting; Yin, Guang-Zhong; Yang, Yuan; Fu, Wanlu; Díaz Palencia, José Luis; Zhao, Junhuan; Wang, Na; Jiang, Yan; De-Yi, WangDue to environmental concerns, some of the conventional halogenated flame retardants have been banned. In this context, both the industrial and academics have made efforts to develop more eco-friendly and sustainable flame retardant materials. Among new flame retardants, bio-based groups have attracted plenty of attention. In this review, varied types of bio-based flame retardants are systematically described, including the structural characteristics, flame retardant behaviors, and an overview of flame retardant mechanism. Recent research progress on various bio-based materials such as flame retardants (e.g., chitosan, lignin, phytic acid, polydopamine, Tannic acid, β-cyclodextrin, etc.) applied to different polymers are adequately summarized. Finally, the opportunities and challenges for the future development of bio-based flame retardants are briefly outlooked.Item Investigation of magnesium hydroxide functionalized by polydopamine/transition metal ions on flame retardancy of epoxy resin.(Journal of Thermal Analysis and Calorimetry, 2022) Zhu, Danping; Bi, Qingqing; Yin, Guang-Zhong; Jiang, Yan; Fu, Wanlu; Wang, Na; De-Yi, WangAiming to impart epoxy resin (EP) with flame retardancy, magnesium hydroxide (MDH) was sequentially functionalized with four transition metals and polydopamine (PDA) to prepare MDH@M-PDA (M includes Fe3+, Co2+, Cu2+, Ni2+). Compared with MDH, MDH@M-PDA presented better dispersion in EP matrix. The results illustrated that a 30 mass% of MDH@Fe-PDA imparted the EP matrix with best fire retardancy and thermal stability. Specifically, the resultant EP/MDH/MDH@Fe-PDA composites remarkably reduced flammability, which is reflected by high LOI value of 29.3% and UL-94 V-0 ratings. The peak heat release rate (PHRR) and total smoke production (TSP) were reduced by 52% and 21%, respectively. Moreover, the impact and tensile strength of EP/MDH/MDH@M-PDA composites are improved compared with EP/MDH due to the better chemical compatibility of PDA in the EP matrix. Notably, this work provided a feasible design for organo-modified MDH and enriched its practical applications of MDH as functional fillers to polymers.Item Nanocarbon-Based Flame Retardant Polymer Nanocomposites.(Molecules, 2021) Yang, Yuan; Díaz Palencia, José Luis; Wang, Na; Jiang, Yan; De-Yi, WangIn recent years, nanocarbon materials have attracted the interest of researchers due to their excellent properties. Nanocarbon-based flame retardant polymer composites have enhanced thermal stability and mechanical properties compared with traditional flame retardant composites. In this article, the unique structural features of nanocarbon-based materials and their use in flame retardant polymeric materials are initially introduced. Afterwards, the flame retardant mechanism of nanocarbon materials is described. The main discussions include material components such as graphene, carbon nanotubes, fullerene (in preparing resins), elastomers, plastics, foams, fabrics, and film–matrix materials. Furthermore, the flame retardant properties of carbon nanomaterials and their modified products are summarized. Carbon nanomaterials not only play the role of a flame retardant in composites, but also play an important role in many aspects such as mechanical reinforcement. Finally, the opportunities and challenges for future development of carbon nanomaterials in flame-retardant polymeric materials are briefly discussed.Item Surface Modification of Ammonium Polyphosphate for Enhancing Flame-Retardant Properties of Thermoplastic Polyurethane.(Materials, 2022) Wang, Zhiwen; Jiang, Yan; Yang, Xiaomei; Zhao, Junhuan; Fu, Wanlu; Wang, Na; De-Yi, WangCurrently, the development of efficient and environmentally friendly flame-retardant thermoplastic polyurethane (TPU) composite materials has caused extensive research. Ammonium polyphosphate (APP) is used as a general intumescent flame retardant to improve the flame retardancy of TPU. In this paper, we developed a functionalized APP flame retardant (APP-Cu@PDA). Adding only 5 wt% of APP-Cu@PDA into TPU can significantly improve the flame-retardant’s performance of the composite material, reflected by a high LOI value of 28% with a UL-94 test of V-0 rating. Compared with pure TPU, the peak heat release rate, total heat release, peak smoke release rate, and total smoke release were reduced by 82%, 25%, 50%, and 29%, respectively. The improvements on the flame-retardant properties of the TPU/5%APP-Cu@PDA composites were due to the following explanations: Cu2+-chelated PDA has a certain catalytic effect on the carbonization process, which can promote the formation of complete carbon layers and hinder the transfer of heat and oxygen. In addition, after adding 5% APP-Cu@PDA, the tensile strength and elongation at the break of TPU composites did not decrease significantly. In summary, we developed a new flame-retardant APP-Cu@PDA, which has better flame-retardant properties than many reported TPU composites, and its preparation process is simple and environmentally friendly. This process can be applied to the industrial production of flame retardants in the future.Item ZIF-67 In Situ Grown on Attapulgite: A Flame Retardant Synergist for Ethylene Vinyl Acetate/Magnesium Hydroxide Composites.(Polymers, 2022) Ma, De-Xin; Yang, Yuan; Yin, Guang-Zhong; Vázquez-López, Antonio; Jiang, Yan; Wang, Na; De-Yi, WangZIF-67@ATP was prepared by the in situ growth of the zeolite imidazole frame (ZIF-67) on the surface of attapulgite (ATP). The structure and surface morphology of ZIF-67@ATP were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Different mass fractions of ATP and ZIF-67@ATP were added to ethylene vinyl acetate (EVA)/magnesium hydroxide (MH) composites as flame retardant synergists. The flame retardancy of EVA composites was evaluated by the limiting oxygen index (LOI) test, UL-94 test and cone calorimeter test. Composites containing 3 wt% of ZIF-67@ATP reached an LOI value of 43% and a V-0 rating in the UL-94 test, and the ignition time of the composite increased from 38 s to 56 s. The tensile strength and impact strength of the composites did not change significantly, but the elongation at break increased greatly. Typically, for composites containing 4 wt% of ZIF-67@ATP, the elongation at break of the composites increased from 69.5% to 522.2% compared to the samples without the synergist. This study provides novel insights into the application of attapulgite in the field of flame retardant polymer materials.