Browsing by Author "Santos, Victoria E."
Now showing 1 - 3 of 3
- Results Per Page
- Sort Options
Item High 2,3-butanediol production from glycerol by Raoultella terrigena CECT 4519.(Bioprocess and Biosystems Engineering, 2020) Ripoll Morales, Vanessa; Rodríguez, Alberto; Ladero, Miguel; Santos, Victoria E.Bioconversion of biodiesel-derived glycerol into 2,3-butanediol has received recently much attention due to its increasing surplus and its multiple uses in industry as bulk chemical. The influence of initial glycerol concentration on 2,3-butanediol production in batch runs has been studied. A concentration higher than 140 g/L produces an inhibitory effect on the final 2,3-butanediol concentration and its production rate. In batch mode, the highest yield respect to the theoretical maximum yield (71%) was reached employing 140 g/L as initial concentration 140 g/L. Based on these results, a high 2,3-butanediol production has been achieved through a fed-batch strategy. The reached 2,3-butanediol concentration was 90.5 g/L from pure glycerol and 80.5 g/L from raw glycerol. The 2,3-butanediol yield respect to the theoretical maximum yield was also improved through the fed-batch operation (90%). To date, this concentration is the highest produced amount employing as biocatalyst a non-pathogenic bacterium (level 1).Item Kinetic modelling of 2,3-butanediol production by Raoultella terrigena CECT 4519 resting cells: Effect of fluid dynamics conditions and initial glycerol concentration.(Biochemical Engineering Journal, 2021) Ripoll Morales, Vanessa; Ladero, Miguel; Santos, Victoria E.Biodiesel-derived glycerol was biologically converted to 2,3-butanediol, an organic compound with multiple industrial applications. Recent studies showed that Raoultella terrigena CECT 4519 is an effective biocatalyst for the bioprocess under conventional growing conditions. In the present work, a novel biocatalyst composed by R. terrigena resting cells was evaluated for the first time. Fluid dynamic conditions has been optimized to maximize 2,3-butanediol production in terms of titre, yield, and selectivity. Regarding the effect of initial glycerol concentration in batch runs, no substrate inhibition was detected in the studied conditions (concentrations between 45 and 250 g/L were used). Employing pure glycerol as carbon source, 82.0 g/L 2,3-butanediol titre was achieved, whereas 76.5 g/L were reached using raw glycerol. These numbers involve an achieved yield respect to maximal theoretic yield of 79% and 77%, respectively. A successful kinetic modelling of the bioprocess was developed and it is able to describe both the evolution of concentrations of relevant components with time and the rates calculated at experimental time values. Estimated specific 2,3-butanediol production rate was 0.034 g2,3-BDO/gX⋅h, while the estimated empirical pseudo-stoichiometric coefficient glycerol/2,3-butanediol was 2.52 gGly/g2,3-BDO. The obtained results showed that R. terrigena resting cells is a promising biocatalyst, which provides new opportunities for developing and scaling-up glycerol biorefineries.Item Study on the Operational Modes Using Both Growing and Resting Cells for Succinic Acid Production from Xylose Kinetic Modelling.(Fermentation, 2023) Escanciano, Itziar A.; Ripoll Morales, Vanessa; Ladero, Miguel; Santos, Victoria E.Succinic acid (SA) is one of the most prominent C4 biomass-based platform chemicals that can be biologically obtained. This article verifies, for the first time, the possibility of producing succinic acid with fed-batch or repeated batch operations with Actinobacillus succinogenes in a resting state, that is, in the absence of a nitrogen source. In this work it is possible to optimise separately the stages of cell growth and production in the fed-batch or repeated batch modes, minimising the costs associated with the nitrogen source and facilitating the subsequent purification of SA. These experiments were carried out with xylose, the most abundant monosaccharide in hemicelluloses, with the results subsequently being compared to those obtained in equivalent operations carried out with cells in a state of growth. First, a cost-effective synthetic growth medium was proposed and successfully employed for SA production. Biocatalysts’ reutilisation showed that the bioprocess can be carried out successfully in repeated batch and fed-batch modes. The best mode for growing cells is repeated batch, achieving a maximum productivity of 0.77 g‧L−1‧h−1, a selectivity of 53% and a yield of 51% with respect to xylose consumed. In contrast, the fed-batch mode was found to be the most convenient mode with resting cell biocatalyst, reaching a maximum productivity of 0.83 g‧L−1‧h−1, a selectivity of 0.78 g‧g−1 and a yield of 68% with respect to the xylose consumed. In addition, by-product formation is significantly reduced when employing resting cells. An unstructured non-segregated kinetic model was developed for both biocatalysts, capable of simulating cell growth, xylose consumption, SA production and by-product generation, with successful estimation of kinetic parameters supported by statistical criteria.